CONTACT US

Find the information you need faster! Check our FAQ to see if the answer to your question is already here!
TECHNICAL PRE-SALE (33)

Every part is compatible with OEM. No modification on your bike except the front fork type is needed. Some tires are wide enough to touch fork covers or rub fork arms. Please refer to the specific wheel description. 

Did you find this FAQ helpful?
1
0

Dishing/offsetting – the rim is moved to the left on spokes. You change the spokes/nipples alignment to be shorter/longer on each side to move the rim to the desired position. It’s a very common procedure, and most of our clients choose dished wheels.

Did you find this FAQ helpful?
0
0

Most of the parts are compatible with the SurRon Youth model as the model shares all geometry with a standard model. Please refer to the COMPATIBILITY tab on the product page. 

Did you find this FAQ helpful?
0
0

Sure! Please get in touch with us before purchase so that we can deduct the cost of those parts.

Did you find this FAQ helpful?
0
0

Unfortunately, we cannot advise or recommend any tire other than ours. Tire models and brands are difficult to tell whether they will fit your bike without installing them first. To be 100% sure, please choose tire fitment on our website.

Did you find this FAQ helpful?
0
0

Currently, we don’t have CAMO tires in stock, but we are doing our best to put them back on sale. We cannot promise any date at the moment. Please sign up for our NEWSLETTER (at the bottom of the side) to get a notification when they are back in stock.

Did you find this FAQ helpful?
0
0

The best fork for 21″ wheels with fat off-road tires is an inverted upside-down type. For example stock DNM, FastAce or upgraded like Manitou Dorado. If you have a standard fork and would like to be more sure please contact us with your fork model.

Did you find this FAQ helpful?
0
0

We are about to start production for new wheel sizes. They will be available soon. Please subscribe to our newsletter to get notifications about new product releases.

Did you find this FAQ helpful?
0
0

For both Talaria&SurRon we recommend 2.15 with 80/90-16″ tire for the front and 2.50 with 100/80-16″ for the rear.
Any wider size for the front requires fork covers modifications and a great dish, which might affect the riding experience.

Did you find this FAQ helpful?
0
0

There are many cons and pros for both sets, but to make a story short 21″&18″ set is recommended for enduro or/and for tall riders, 19″&16″ set is recommended for motocross or/and for short riders.

Did you find this FAQ helpful?
0
0

All wheels come Plug&Play, and no modifications are needed except front fork covers. Some tires are wide enough to touch fork covers or rub fork arms. Please refer to the specific wheel description.

Did you find this FAQ helpful?
0
0

We offer the best quality/price tires on the market. If not specified, they are little-known Asian brands, light and durable, that fit perfectly SurRon/Talaria without any modifications on the bike. Intermediate Compound means that they are designed for both soft and hard terrain, meaning sand, dirt, pavement, rocks, water holes, woods etc.

Did you find this FAQ helpful?
0
0

Our wheels are more robust than stock wheels and strong enough to withstand more than what a Sur-Ron/Talaria bike can stand. Our main goal was to make the best price-quality offer on the market, and so far, it is the best. We also want to give customers alternative wheel upgrade options for expensive competitors’ products.

Did you find this FAQ helpful?
0
0

Stock Surron/Talaria has 19″ small tires and a 48T sprocket. 18″ Wide and Super Wide tires have the same diameter, so the top speed would be the same, but to compensate for the additional weight, we recommend upgrading to the larger sprocket.
16″ SuperMoto tires are a bit smaller than OEM, so in order to keep the top speed, we recommend a bit smaller sprocket, but to keep the exact dynamics, you can stay with 48T or go with the larger sprocket.

40T is designed especially for low-speed high torque upgraded powertrain systems (60V), so you can hit tons of mph

Did you find this FAQ helpful?
0
0

For off-road wheels, we choose 1.85 rim width – it is a perfect size for SurRon/Talaria because the widest possible tire that fits the bike will fit the rim.

For on-road wheels, we highly recommend using our combination available on the product site or at least with the exact sizes for each rim. Any other might not fit well – read more here.

Did you find this FAQ helpful?
0
0

Our wheels are equipped with OEM hubs which means they have OEM rotor bolt patterns – as long the bolt pattern matches your desired rotor bolt pattern, it can be used.

Did you find this FAQ helpful?
0
0

You can, but you don’t have to. 21″ will rise in front of the bike, but it will correct the head tube angle for a better front suspension angle of attack. You can compensate for it with a linkage riser.

Did you find this FAQ helpful?
0
0

Sure it will. X160/Youth version differs from the standard only by smaller wheels, powertrain and front fork. The frame or any other construction desing is the same.

Did you find this FAQ helpful?
0
0

Our 21″ wheels are based on standard market 1.60″ width size, so they will fit any 21″ off-road tire width.

Did you find this FAQ helpful?
0
0

All of our wheel sets are plug&play with standard SurRon/Talaria fork (DNM). If your bike has a different fork please TIRE FITMENT tab on the specific wheel product page for more info.

Did you find this FAQ helpful?
0
0

Sure, we do make custom tire fitment on special requests like sand/desert tires etc. Please contact us directly with your idea.

Did you find this FAQ helpful?
0
0

Yes, the 18″ wheel is almost the same. It has a smaller rim diameter but the same outer tire diameter, which means more rubber to work for you on trial.

Did you find this FAQ helpful?
0
0

It works for some riders, but in general, it is not a desirable combination as it tilts the whole bike to much the rear which makes it harder to manoeuvre.

Did you find this FAQ helpful?
0
0

It means that we cut the side knobs that would hit the chain. We use special tools to do it fast and cleanly. Nevertheless, we recommend dishing/offsetting as with trimming you loose corner traction.
What does trimming/trim mean?

Did you find this FAQ helpful?
0
0

As far as we know, DNM is the only fork capable of mounting two brake callipers.

Did you find this FAQ helpful?
0
0

Sure, we can but it will not fit probably any fork.

Did you find this FAQ helpful?
0
0

It all depends on your preference. The wider you go the wider tire you can put the more grip you can have. The most common combo is 3.00″+ 2.50″ rims with 110 and 90 tires.

Did you find this FAQ helpful?
0
0

We cannot 100% guarantee but most of the aftermarket batteries are compatible with our Seat Lift.

Did you find this FAQ helpful?
0
0

Yes, it is compatible with most, if not all, brake callipers.

Did you find this FAQ helpful?
0
0

It all depends on the manufacturer and there is not one converter for all tires/models. Real-life sizes differ from than ones described. Please check specific products description or contact us for details.

Did you find this FAQ helpful?
0
0

We are getting ready to sell tubeless on-road sets. Stay tuned!

Did you find this FAQ helpful?
0
0

We do not recommend putting a wide tire to a narrow rim. They will most likely not fit. If you would like to go with a wider tire we recommend upgrading the rim to wider at least 1.60 and the best 1.85.

Did you find this FAQ helpful?
0
0

1.85″ rim width is the perfect size as it will fit the widest tire that will ever fit SurRon. There is no point going with a 2.15 rim.

Did you find this FAQ helpful?
0
0
TECHNICAL AFTER SALE (11)

Every part is compatible with OEM. No modification on your bike except the front fork type is needed. Some tires are wide enough to touch fork covers or rub fork arms. Please refer to the specific wheel description. 

Did you find this FAQ helpful?
1
0

We use an OEM hub with a SurRon bolt pattern. Please double-check if you use the rear disk for the rear wheel because it differs from the front disk.

Did you find this FAQ helpful?
0
1

Yes, we can sell every single bit we build our products with—rims, spokes, nipples, bolts, adapters etc. Please check the SPARES category on our website.

Did you find this FAQ helpful?
0
0

You need to either dish the rim or cut the knobs. Read more about dishing here.

Did you find this FAQ helpful?
0
0

Please make sure the axis of the wheel is straight in relation to the swing arm. In other words, ensure your lockdown axle blocks are both in the same place on both sides.

Did you find this FAQ helpful?
0
0

For off-road wheels, we choose 1.85 rim width – it is a perfect size for SurRon/Talaria because the widest possible tire that fits the bike will fit the rim.

For on-road wheels, we highly recommend using our combination available on the product site or at least with the exact sizes for each rim. Any other might not fit well – read more here.

Did you find this FAQ helpful?
0
0

You need to use your existing hub spacers, sprocket, and brake disks from OEM.

Did you find this FAQ helpful?
0
0

Sure! As long the belt is farther or in the same position as the OEM chain, you can still use your upgraded belt kit. If the belt is closer to the wheel, it might rub with wide tires.

Did you find this FAQ helpful?
0
0

We intentionally take them off for shipping purposes. Please go to the manual page to get more information about how to plug them back.

Did you find this FAQ helpful?
0
0

You can, but you don’t have to. 21″ will rise in front of the bike, but it will correct the head tube angle for a better front suspension angle of attack. You can compensate for it with a linkage riser.

Did you find this FAQ helpful?
0
0

Our 21″ wheels are based on standard market 1.60″ width size, so they will fit any 21″ off-road tire width.

Did you find this FAQ helpful?
0
0
ORDER AFTER SALE (6)

Order status can be checked in your website account or in the Order Summary link we sent you after making the order. You don’t need to contact us about any updates – each will be sent via e-mail and will be updated in Order Summary or website account.

Did you find this FAQ helpful?
0
2

You don’t need to contact us about order updates – each will be sent via e-mail, and if needed, all current details can be checked on the order site in your profile or in the link we sent you after making the order.

Did you find this FAQ helpful?
0
6

In most cases, it is not possible since we start proceeding with all orders as soon as they show up in our system, but don’t hesitate and contact us – there might be a chance to change it!

Did you find this FAQ helpful?
0
0

Sure! If the package wasn’t shipped yet, we can add products. It might change lead time and, in some cases increase shipping costs a bit, but don’t hesitate and contact us!

Did you find this FAQ helpful?
0
0

Unfortunately, we do not refund before shipment due to processing, packing and restocking costs.

Did you find this FAQ helpful?
0
1

All Milk Racing products are legally 1-year warranted for any production defects. Items are not warranted against normal wear, incorrect installation, incorrect alignment, poor maintenance, misapplication or damage due to crash. All products especially wheels needs to be serviced and checked before each ride if all bolts/nipples are in place and if the tension is correct.

If you have any problems with our products please do not hesitate to contact us directly. We will do our best to help you as much as possible to resolve any issue. Also, we are very happy to hear your feedback. Constant product improvement is a high priority for us. Thank you for your trust.

Did you find this FAQ helpful?
0
0
ORDER PRE-SALE (3)

We always do our best to ship orders long before the deadline. After purchase, you will receive an e-mail with a link to track the order’s status and to check the “estimated shipping date”.
Please notice that the order starts proceeding only when we receive the payment. 
Contact us before ordering for more detailed information about the current lead time if necessary.

CUSTOM PRODUCT
If the custom option is selected, the lead time is time for “Usually ships in:” + time for proceed time for the longest option.
E.g. “Usually ships in:5-7days” + “TIRE FITMENT: 2 weeks proceed time” = 3 weeks proceed time.

BACKORDER
If the product/custom option is in BACKORDER, it means that you can make an order, but the lead time is unknown yet (if the date is not specified), and we will postpone shipping until it’s back in stock. Contact us before order for more backorder details if necessary.

MULTIPLE DIFFERENT PRODUCTS ORDER

The shipping for multiple products will begin for the longest lead time product from the order. Please make separete orders if necessary.

MULTIPLE THE SAME PRODUCTS ORDER

Orders with multiple the same products may be delayed depending on the quantity ordered. Please contact us before big order for more precise leadtime if necessary.

PRIORITY SHIPPING

The shipping method (priority or economy) does not affect leadtime(manufacturing time) of your order. We know that time is of the essence, so we make every effort to fulfill your order ASAP, regardless of whether the shipping is economy or priority.

Did you find this FAQ helpful?
0
0

We always do our best to ship the order as soon as possible. Neverless, if you have any deadline (event, race etc.), please contact us before ordering – sometimes we ship orders way before the offical lead time.

Did you find this FAQ helpful?
0
0

All Milk Racing products are legally 1-year warranted for any production defects. Items are not warranted against normal wear, incorrect installation, incorrect alignment, poor maintenance, misapplication or damage due to crash. All products especially wheels needs to be serviced and checked before each ride if all bolts/nipples are in place and if the tension is correct.

If you have any problems with our products please do not hesitate to contact us directly. We will do our best to help you as much as possible to resolve any issue. Also, we are very happy to hear your feedback. Constant product improvement is a high priority for us. Thank you for your trust.

Did you find this FAQ helpful?
0
0

Currently we are overloaded with inquiries - response time may be longer than usual. Thank you for your patience in advance.

Can’t find the answer in the FAQ? Contact us using the form below.
Possible FAQs related to your message:
Shopping cart0
There are no products in the cart!
Continue shopping
0